Program
Conference programme: Download the PROGRAM hereThe conference programme will be as follows:
| Sunday July 9th | Hotel SB Diagonal Zero (Plaça Llevant, s/n, 08019 Barcelona) |
|
18.00-20.00 |
Registration |
|
20.00-21.00 |
Welcoming cocktail |
| Monday July 10th | Escola d’Enginyeria Barcelona Est. Campus Diagonal Besòs, Building A. Av. Eduard Maristany, 16, 08019 Barcelona |
|
08.00-09.00 09.00-09.15 |
Registration Welcome ceremony by Vice-Dean of Research at EEBE Campus (Prof. Jordi José), ICSAM Chairman (Prof. Goroh Itoh), ICSAM local chairman (Prof. José M. Cabrera) |
|
09.15-09.30 |
Tribute to the memory of Prof. Alex Zhilyaev by Prof. Terence Langdon, Prof. Alexander Pesin and Prof. Jose Maria Cabrera |
|
09.30-10.15 |
Plenary «New developments in the processing of metallic alloys for achieving exceptional superplastic properties» by Prof. Terence Langdon (UK) |
|
10.15-10.35 |
«An investigation of forming of Ti-6Al-4V at lower temperatures» by Diego González (UK) |
|
10.35-10.55 |
«Fabrication and superplastic forming property of TiB whisker reinforced titanium alloy matrix composite sheet» by Mingjie Fu (China) |
|
10.55-11.15 |
«The Ti-based alloys for low-temperature superplastic forming » by Anton Kotov (Russia) |
|
11.15-11.45 |
Coffee Break – Poster |
|
11.45-12.05 |
«Superplasticity of Ti-6Al-7Nb alloys with different Initial microstructures processed by high-pressure torsion» by Jorge Cubero (Costa Rica) |
|
12.05-12.25 |
«Precise forming of Ti60 alloy by superplastic forming /diffusion bonding» by Jiang Shaosong (China) |
|
12.25-12.45 |
«Numerical simulation and experimental trials on superplastic forming for thin-walled structure of Ti2AINb alloy » by Ning Zhang (China) |
|
12.45-13.05 |
«Effect of friction stir forming parameters on mechanical properties and plastic flow of material in the mechanical …» by Hamed Mofidi Tabatabaei (Japan) |
|
13.05-13.25 |
«Mechanical and microstructural analysis of Ti-6Al-4V material in a wide range of superplastic forming process conditions» by Alexander Sancho (UK) |
|
13.25-15.00 |
Lunch |
|
15.00-15.45 |
Plenary «Towards high-speed and low-temperature superplastic deformation in structural ceramics» by Hidehiro Yoshida (Japan) |
|
15.45-16.05 |
«Creep behavior enhanced under electric field in zirconia» by Koji Morita (Japan) |
|
16.05-16.25 |
«Effect of deformation conditions on the superplastic deformation behavior of LZ91 Mg-Li alloy under electric field» by Jianqiang Yang (China) |
|
16.25-16.45 |
Coffee Break – Poster |
|
16.45-17.05 |
«Integration of HF and SPF technology in an efficient industrial production flow for high rates aeronautical parts» by Yves Marcel (France) |
|
17.05-17.25 |
«Investigation of the complexities inherent in manufacturing near-unconstrained superplastic parts by experiments and simulation» by Eric Bol (USA) |
|
17.25-17.45 |
«Formation mechanism and elimination method on surface groove of the hollow lattice structure by superplastic forming» by Yanhong Mu (China) |
|
17.45-18.05 |
«Study on superplastic gas-bulging properties and microstructure evolution of as-rolled 2A97 Al-Li alloy» by Zhang Yanling (China) |
|
18.05-18.25 |
«Superplastic forming process research of front aluminium alloy opening and closing mechanism hatch for multiple units» by Guofeng Wang (China) |
|
18.25-18.45 |
«Low-temperature superplasticity of Si-added medium-Mn steel» by Hyun-Bin Jeong (South Korea) |
| Tuesday July 11th | Escola d’Enginyeria Barcelona Est; Campus Diagonal Besòs, Building A. Av. Eduard Maristany, 16, 08019 Barcelona |
|
09.00-09.45 |
Plenary «Achieving superplasticity in hard-to-deform metallic materials using high-pressure sliding process» by Zenji Horita (Japan) |
|
09.45-10.05 |
«Predicting ECAP misorientation evolution and its influence on superplasticity for an Al-Zn-Mg-Cr alloy» by Fernando Carreño (Spain) |
|
10.05-10.25 |
«Nanostructuring Ti-alloys by HPT: Corrosion properties and bioactivation» by Alberto Moreira Jorge Jr (Brazil) |
|
10.25-10.45 |
«Mechanical properties and corrosion resistance of the Zn-1%Mg alloy with Ca, Dy, or Mn after severe plastic deformation» by Natalia Martynenko (Russia) |
|
10.45-11.05 |
«Microstructural characteristics, mechanical and corrosion properties of a low-alloyed Mg alloy after different deformation…» by Zahra Abbasi (Austria) |
|
11.05-11.30 |
Coffee Break – Poster |
|
11.30-11.50 |
«Effect of severe plastic deformation on phase transformation in duplex stainless steel» by Claudio Gennari (Italy) |
|
11.50-12.10 |
«Consolidation of AZ31 magnesium chips using equal channel angular pressing» by Majid Al-Maharbi (Oman) |
|
12.10-12.30 |
«Structure and service properties of Fe-Mn Alloys after severe plastic deformation for biomedical applications» by Olga Rybalchenko (Russia) |
|
12.30-12.50 |
“Effect of high-pressure torsion on structure and properties of metal-matrix composites” by Sergey Zherebtsov (Russia) |
|
12.50-13.10 |
«Secondary phase precipitation in ultrafine-grained Superduplex stainless steels » by Alisiya Biserova-Tahchieva (Spain) |
|
13.10-13.30 |
“An industrial applicaon of mulple simulaons for “a non formable“ geometry – one piece roof for cable cars” by Christoph Pirchl (Liechtenstein) |
|
13.10-15.00 |
Lunch |
|
15.00-19.30 |
Guided Tour to visit Down Town and Holly Family Temple: Departure from Conference Venue |
|
20.00-22.30 |
Gala dinner: Hotel AC Marriot, Passeig del Taulat 278, 08019 – Barcelona |
| Wednesday July 12th | Escola d’Enginyeria Barcelona Est; Campus Diagonal Besòs, Building A. Av. Eduard Maristany, 16, 08019 Barcelona |
|
09.00-09.30 |
Keynote «In-situ neutron and synchrotron methods for the investigation of plastic deformation and annealing in metals» by Klaus Dieter Liss (Australia) |
|
09.30-09.50 |
«Grain boundary sliding at low temperatures» by Roberto Figueiredo (Brazil) |
|
09.50-10.10 |
«In-situ heating observations on microstructure relaxation of ultrafine-grained high-entropy alloys using neutron diffraction and…» by Megumi Kawasaki (USA) |
|
10.10-10.30 |
«Deducing macroscopic viscosity from microscopic cooperative motion when GBS is accommodated by diffusion» by Laurent Delannay (Belgium) |
|
10.30-10.50 |
«The effect of chemical composition on the mechanisms of superplastic deformation for the alloys with matrix …» by Anastasia Mikhaylovskaya (Russia) |
|
10.50-11.10 |
«Retained austenite grain size as a factor controlling the plasticity of medium-Mn automotive steels» by Adam Skowronek (Poland) |
|
11.10-11.30 |
«Puzzling aspects of (112 ̅2) twinning in hcp metals» by Andrej Ostapovec (Czech Republic) |
|
11.30-11.50 |
Coffee Break – Poster |
|
11.50-12.10 |
«Hot deformation of ultrafine-grained TiC-reinforced AlCrFeNbMoTiV refractory high entropy alloys» by Pablo Martin (Spain) |
|
12.10-12.30 |
«Deformation behaviour and microstructural evolution of high-entropy CoFeMnNi alloy at hot deformation condition with low strain rate» by Lihua Du (China) |
|
12.30-12.50 |
«Comparative studies of hyperbolic sine constitutive models for constant pressure superplastic tests » by Luis Garcia Barrachina (Spain) |
|
12.50-13.10 |
«Constitutive relationships for sintered Cobalt during high-temperature deformation» by Verónica Collado (Sweden) |
|
13.10-13.30 |
«Warm tensile properties of low-alloy TRIP steel warm-rolled just prior to isothermal holding treatment» by Goroh Itoh (Japan) |
|
13.30-15.00 |
Lunch |
|
15.00-15.30 |
Keynote «Ultra-severe plastic deformation for room-temperature superplasticity and superfunctionality» by Kaveh Edalati (Japan) |
|
15.30-15.50 |
«Investigation of the influence of kinematic asymmetry on the properties of laminated materials» by Olesya Dmitrievna Biryukova (Russia) |
|
15.50-16.10 |
«FEM simulation of dynamic recrystallization during asymmetric hot rolling of high-speed steel M2» by Denis Pustovoytov (Russia) |
|
16.10-16.30 |
«Improvement in strength and ductility of flame-retardant magnesium alloy through uniaxial hot pressing» by Koichi Kitazono (Japan) |
|
16.30-16.50 |
«Integration of sheet metal forming processes to optimize the final thickness distribution of axisymmetric components» by Donato Sorgente (Italy) |
|
16.50-17.10 |
«Experimental study of the effect of increasing technological plasticity during asymmetric rolling of aluminum alloys» by Anna Kozhemyakina (Russia) |
|
17.10-17.30 |
Closing ceremony and Awards to best poster, and best senior and junior presenters |
POSTERS (to be placed since Monday)
- “Effect of rotary swaging on the mechanical properties and corrosion resistance of the Zn-1%Mg and Zn-1%Mg-0.1%Ca alloys” by Olga Rybalchenko (Russia)
- “Superplastic deformation behaviour and constitutive modelling of Ti-55 sheets under bi-axial stress states” by Lihua Du (China)
- “High temperature tensile flow of 3Y–TZP ceramics under an AC electric field” by Itsuki Imanishi (Japan)
- “Hot plastic behavior of an ultrafine-grained aluminium alloy fabricated by laser powder bed fusion and equal channel angular pressing” by Enrique Huerta and Jairo Muñoz
- “High-speed self-joining of 3Y-TZP using an AC electric field” by Kohta Nambu
- “Development of asymmetric cold rolling technology of high-strength steel grades in order to exclude intermediate annealing operations” by Denis Pustovoytov and Alexander Pesin
- “Improved stochastic dissimilar diffusion bonding model with experimental validation” by Ramulu Mamidala and Eric Bol
- “Texture and strain rate sensitivity analysis of solid solution and precipitation hardening aluminum alloys processed by repetitive corrugation and straightening” by Sergio Elizalde
- “Exploring the effects of repetitive corrugation and strengthening on alloy A5083 using X-ray diffraction techniques” by Carlos Alberto de la Trinidad
- “Microstructural and corrosion study of a “non-commercial” high manganese steel“ by Mauro Cerra (Brazil)
